Titanium Rod Grade 5
Titanium rod grade 5 is also named as titanium ti6al4v rod. It has the same main components as Gr5 titanium plate, with 6% aluminum and 4% vanadium added. It is one kind of common titanium alloy rod. THT is a leading titanium rod manufacturer and titanium rod supplier in China. We have decades of production experience in the titanium industry, providing a small size inventory and excellent prices. Our Gr5 titanium rod has the following characteristics:
- Good deformation resistance and thermal stability
- Higher fatigue performance and crack growth resistance in seawater
- Good fracture toughness and resistance to thermal expansion stress
- Good corrosion resistance, working temperature range -196℃ to 450℃
- Superior processability and superplasticity: suitable for a variety of pressure processing methods, easy to weld and machine processing
- Datasheet
- Production Processing
- MTC
|
Titanium Grade |
Grade 5 Titanium(Ti6Al4V) |
|
Other Available Titanium Grade |
GR1/GR2/GR3/Gr4/GR7/GR9/GR12/Gr5Eli/Gr23 |
|
Standard |
ASTM B348/ASME SB348, ASTM F136, ISO-5832-3,AMS 4928 etc |
|
Shape |
Titanium round rod/bar, Titanium square rod/bar,Titanium flat rod/bar |
| Titanium rectangle rod/bar, Titanium hex rod/bar | |
|
Diameter |
1-300mm,customizable |
|
Length |
50mm-6000mm,customizable |
|
Tolerance |
h6~h13 H10~H13 |
|
Surface |
Bright/Polished/ Machined |
|
Main Technique |
Hot Forged; Hot Rolled; Cold drawn; Straighten etc |
| Heat Treatment | Usually are Annealled,but Solid Solution & Aging can be also OK |
| Material Milling Certificate | According to. EN 10204.3.1 Including Chemical composition and Mechanical property |
1. To prepare Gr5 titanium rod billets from qualified raw materials through heating, forging, rolling and other processes, it is necessary to control the size, shape, surface quality, etc. of the billets to ensure the stability of the rolling process and the quality of the product
2. The rolling of Gr5 titanium rods needs to be carried out at high temperatures, and the heating temperature and time need to be determined based on factors such as the chemical composition of the raw materials, rolling process, and product requirements. During the heating process, the billet needs to be insulated to avoid temperature fluctuations and oxidation phenomena.
3. Send the heated billet into the rolling mill for rolling. At the same time, it is necessary to monitor and control the temperature and stress during the rolling process to avoid problems such as cracks and deformation of the material.
4. Cooling
The cooling rate needs to be determined based on factors such as the chemical composition, microstructure, and performance requirements of the product.
5. Straightening
During the rolling process of Gr5 titanium rods, there may be problems such as bending and twisting, and straightening can be done using mechanical or heating methods.


Why THT Titanium Rod Grade 5
All THT Gr5 titanium bars undergo ultrasonic testing to ensure there are no cracks, inclusions, pores, or other defects on both the internal and external surfaces. This process also guarantees the material’s uniformity. Our Gr5 titanium bars feature tight tolerances and high precision, with smooth and refined surfaces free from peeling and roll marks. They maintain excellent straightness and do not exhibit the “knife bend” phenomenon. The mechanical properties of our titanium bars are exceptional, offering high fatigue resistance and good toughness.
We strictly adhere to the mechanical performance requirements and chemical composition specified by our customers, comply with relevant national standards, and provide genuine material certification and SGS test reports.

How you inspect titanium rod grade 5 straightness?
THT conducts 100% straightness inspection on all Gr5 titanium bars. Typically, the straightness tolerance for conventional titanium bars ranges from 0.3‰ to 0.5‰. The specific procedure involves placing the Gr5 titanium bar on a platform with good lighting conditions, allowing it to roll freely. Our QC would stand in front and uses a 0.2-millimeter ruler to measure the gap between the bar and the platform.
Polished or grinded surface.
Each titanium bar weight(kg)=OD*OD*3.542*L/1000000
OD:Titanium Bar Diameter
L:Titanium Bar Length
Mostly Gr5 titanium bar is stock available and could delivery within three days after payment.
Our MOQ is 1kg.
Yes, we could also do titanium machining in our factory.












